Weinig Unimat 23E Select 6 Head Moulder

General Info:

Stock #: CD-B-181029
Location: Dawsonville, GA 30534
Brand: Weinig
Model: Unimat 23E Select
Serial #: 95179
Year: 2002
Loading Fee: Rigging Required

Specifications:

Working Width: 3/4″ – 9 1/16″ (at cutting circle dia. 5 1/2″)
Working Height: 5/16″ – 4 3/4″ (at cutting circle dia. 5″)
Spindle Speed: 6000 rpm
Spindle Diameter: 1 1/2″
Clamping Length of Horizontal Spindles: 9 1/2″
Clamping Length of Vertical Spindles: 6 3/4″
Feed Speed: 20-78 ft/min
Diameter of Feed Rollers: 5 1/2″
Width of Feed Rollers: 2 x 2″
Width of Rollers Opposite Left Spindle: 1 x 5/8″
Diameter of Driven Roller in Outfeed Table: 4″
Width of Driven Roller in Outfeed Table: 2″ + 5/8″
Pressure for Pneumatic Feed Rollers Max: 87 psi
Adjustment Range of Straightening Table and Edge Jointing Fence: 3/8″ each
Adjustment Range of Vertical Spindles, Axial: 3 1/8″
Adjustment Range of 1st Bottom Spindle, Axial: 3/4″
Adjustment Range of Horizontal Spindles, Axial: 1 3/4″
Setting Accuracy of Mechanical Digital Read-Outs: .002″
Length of Straightening Table: 6’6″
Tool Cutting Circles – 1st Bottom Spindle: 5″ – 7 1/8″
Tool Cutting Circles – Vertical Spindles, Left: 4 3/8″ – 7 7/8″
Tool Cutting Circles – Vertical Spindles, Right: 4 3/8″ – 9 7/8″
Tool Cutting Circles – Horizontal Spindles, Above: 4″ – 8 7/8″
Tool Cutting Circles – Horizontal Spindles, Below: 4″ – 9 7/8″
Feed Motor HP: 5.5
1st Spindle Below HP: 10
2nd/3rd Spindle Right/Left HP: 20
4th Spindle Above HP: 15
5th Spindle Above HP: 10
6th Spindle Below HP: 10
Voltage: 440 V / 3PH

Equipped With:

Power Driven Feed System, Heavy Cast Iron Base, Pneumatic Spindle Clamping, Receding Chipbreaker, Pneumatically Pressurized Feed Rollers, Reference Engraver for 1st Bottom Spindle, Digi-Set for Left Both Top Spindles, Central Location of Lubrication Points, Hardened Table Insert Before and After 1st Bottom Spindle, Mechanical Read-Out on Pressure Shoe Behind Top Spindle 5, Vertical Spindle Table Plates Easily Adjustable to the Cutting Circle, Mechanical Brakes on All Spindles

Additional Info:

This machine is under power and can be demoed upon request. It has been well maintained (still at original owner’s shop) and comes with several extra heads. When it was built the owner preferred the machine to be red so Weinig used Hydromat panels besides the blue Unimat panels.

This machine is being sold from our client’s facility and is sold AS-IS (Not covered under the MDNA Return Privilege). We always recommend machine be inspected in person to verify condition.