One Plasma Systems 2010-H 10′ x 25′ CNC Plasma / Burn Table

General Info:

Stock #: CD-B-181007
Location: Scottdale, GA 30079
Brand: One Plasma Systems
Model: 2010-H
Year: 2009
Loading Fee: Rigging Required

Specifications:

Cutting Width: 120″ plus machine parking space of 18″
Cutting Length: 300″ plus machine parking space of 72″
Cut Capacity (Plasma – Hypertherm HPR260): Mild Steel (Severance) – 2.5″, Mild Steel (Pierce) – 1.25″, Stainless Steel (Severance) – 2″, Stainless Steel (Pierce) – 1.25″, Aluminum (Severance) – 2″, Aluminum (Pierce) – 1″
Rapid Traverse Speed: 800 IPM
Drive Type: Rack and Pinion
Rail Height: 26″
Down Draft Table: Yes (Multisectional. Each section is activated by limit switches along the rail)
Electrical: 460V/3Ph

Equipped With:

Cleveland Machine Controls Burny 10LCD Plus Controller, Cleveland Motion Control’s Operator’s Station (Oxy-Fuel Gas Manifold and Cotrol Panel and Three Oxy-Fuel Motorized Torch Lifter Stations), Hypertherm HPR260 High Density Plasma System with Kaliburn Inova Torch Height Control and Auto Gas Console, and Pneumatic Break-Away for Plasma Torch

Additional Info:

This machine is under power and can be demoed upon request. The table was custom built with the base being beveled on both sides going into the ground. The beveled sides meet at a auger which would feed slag and cut parts that fell through the table to the end of the table. We have drawings of the design if you would like to see it. There is also a multi zone downdraft system under the table. There is a series of limit switches along the rail that when hit will always activated the zone from which the gantry is over.

This machine is being sold from our client’s facility and is sold AS-IS (Not covered under the MDNA Return Privilege). We always recommend machine be inspected in person to verify condition.