HMT #4 Rotary Hydraulic Tube Booster Bending Machine

General Info:

Stock#: BC-141008

Machine Name: HMT #4 Rotary Hydraulic Tube Booster Bending Machine

Condition: Used, Good

Brand: HMT

Model: 4L STD

Year: 2009

Approximate Shipping Weight: N/A

Approximate Shipping Dimensions: 6.5′ W x 26′ L x 4.5′ H

Location: GA

Specifications of HMT #4:

‰Û¢ Heavy Duty Single Axis bender which can also be used for conventional bending

‰Û¢ Designed to form tight radius (1 x D) thick wall tubes used in the boiler industry using empty bend tooling

‰Û¢ Designed to produce the maximum amount of boost pressure while using the least amount of space to grip tube.

‰Û¢ The grip from bottom clamping device locks the tube into the pressure die and allows the tube to be forced (boosted) intoåÊåÊåÊåÊ the bend die, thus reducing wall thinning and ovality.

Non Ferrous Tubing up to 25,000 PSI 6″ OD x .250 WT

Steel Tubing upto 40,000 PSI 6″ OD x .165 WT

Stainless Steel Tubing up to 60,000 PSI 4.5″ OD x .172 WT

Steel Pipe IPS up to SCH 80 Pipe 4″

Solid Steel Bar up to 3.5″

Square Steel Tube up to 4″ x .250 WT

Max Radius: 24″ CLR

Max Tube Over Mandrel: 20′

Max Degree of Bend: 180 + Overbend

Bend Arm Speed: 4 RPM

Equipped with:

Standard 24″ Capacity Straight Clamping Swing Arm

Tooling Plate on Die Boss, Deep Seated Die Keyway

Steel Slides with Alumabronze Wear Strips

HD Solid Steel Clamp Holder with Half Round, Hardened Tooling Bolts

HD Solid Steel Pressure Die Holder with Additional CAM Followers

58″ Long Follower Bar and Hardened Master Bar

All Hydraulic Cylinders are Parker Brand

Main Drive Motor – 40 HP 1725 RPM, 480VAC

Booster Motor – 30 HP 1725 RPM, 480VAC

Parker Hydraulic Pumps and Pressure Control Valves

Parker Hydraulic Proportional and Directional Control Valves

Parker 3000 PSI Hoses

Bijur Lube System

Pause Mats

1AXB+ PLC Based Controller

Pressure Die Assist

Over Head Tie Bar

Wiper Base and Holder

Additional Info of HMT #4:

The machine is currently under power and is ready to be tested.åÊ We are currently selling this and a Pines #4 Mandrel Bender as well.åÊ There are several dies available that have been shared by both machines.åÊ Because of this we are selling each machine without tooling.åÊ You will have the option to pick out any available tooling and negotiate a price out with us.åÊA complete list of dies can be seen by clicking this link Die List

Seller Contact Information:

Carl Davis

404-933-3804

The Equipment Hub, LLC

1380-A Beverage Dr.

Stone Mountain, GA 30083